Earth Clamp Mod

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
AliveOak
Posts: 20
Joined: Fri 29 Aug , 2014 10:57 am
Hardware/Software: MicroRouter Compact (SN:H04459/1)
RS232 Cable
Dell PC + XP Pro
Next Step Control Card (Green LED)

Earth Clamp Mod

Post by AliveOak » Thu 06 Aug , 2020 9:19 am

Can someone point me in the direction of the Earth Clamp Mod for the Microrouter Compact mentioned elsewhere on the message board?

Many thanks.

Martin
CNC Guru
CNC Guru
Posts: 1732
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Earth Clamp Mod

Post by Martin » Fri 07 Aug , 2020 12:07 pm

Are you talking about the Dust Extraction earth mod for the static?

If you are it`s as simple as running a earth wire between the top & bottom barrels to earth both.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1302
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Earth Clamp Mod

Post by Steve » Wed 12 Aug , 2020 7:01 am

There was also a mod done adding a earth wire to the vacuum nose pipe where it passes through the side window as static could jump the gap and ground to the cabinet.

Post Reply