Page 1 of 1
Microrouter V5 Electrical Drawings
Posted: Sun 06 May , 2012 14:59 pm
by rasp
Hi all,
is there a chance you could post up some electrical drawings that cover my Microrouter Pro V5 NS, serial no H04706 April 04
Thanks
Graham
Re: Microrouter V5 Electrical Drawings
Posted: Tue 08 May , 2012 10:11 am
by bradders
I Hope these are the correct drawings
Re: Microrouter V5 Electrical Drawings
Posted: Tue 08 May , 2012 11:18 am
by rasp
Thanks for the drawings, unfortunately these are not the ones for my machine, here is a photo of the control, as you can see from the pictures my set up has an external Parker XLT50-S stepper driver and an additional PSU.
Is there a chance you still have the drawings for this version.
Regards
Graham
Re: Microrouter V5 Electrical Drawings
Posted: Wed 09 May , 2012 8:35 am
by Steve
Have had a look and cannot find the drawing for your machine.
Do you have a problem with it? I can probably help with that.
The machine was redesigned in 2006 and i attach the schematic for that.
This drawing will show the stepper motor drives you have on the PRO but the relays are now on a PCB.
I attach the diagram for the Microrouter Compact This has the relay arrangement as you machine with the Delay timer and the spindle control relays.
Re: Microrouter V5 Electrical Drawings
Posted: Wed 09 May , 2012 8:59 am
by rasp
Thanks Steve,
I don't have a problem, I was trying to work out if I could connect a 4th axis via another external drive.
Graham
Re: Microrouter V5 Electrical Drawings
Posted: Wed 09 May , 2012 13:20 pm
by Denford Admin
Have a look here:
viewtopic.php?f=54&t=3576
Step3 and Dir3 are the 4th axes
Re: Microrouter V5 Electrical Drawings
Posted: Thu 10 May , 2012 21:00 pm
by rasp
Thanks for the tip.
Regards
Graham