Vacuum not sucking

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Vacuum not sucking

Post by bradders » Mon 14 Jan , 2008 9:47 am

If you are running Ver 2 VR Milling then the ROUTER MACHINE option does not have the facility in the MINT file to control a Vacuum pump. If the Vacuum is not running then you maybe have the wrong machine selected or perhaps a fuse has blown
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 17 Jan , 2008 16:55 pm

I've pretty sure the Router machines with V3 or V5 in the name had the vacuum pump option included - any previous machine names won't have it supported by the mint (ie, the machine logic) file.
Top
Post Reply

Return to “MicroRouter”