Software Interfacing Problem
Posted: Tue 21 Feb , 2017 17:16 pm
Hello,
I'm working as a CAD/CAM/CNC instructor in an engineering university namely Dawood University of Engineering & Technology (Formerly Dawood College of Engineering & Technology) situated in Karachi, Sindh, Pakistan. We had purchased three (3) Denford CNC Machines in 2006 namely MICROMILL, MICROROUTER COMPACT and MICROTURN.
After installing the software VR Milling and providing the license key (SecKey.tff), the software installs successfully. But, when we connect the machine via software it will give some software interfacing caution with the hardware (i.e. MICROMILL & MICROROUTER COMPACT). Please refer to the screenshots attached.
Kindly help me as we are an educational institution and providing CAD/CAM/CNC training to the engineering students.
Thank you in advance. Waiting for an early response.
Regards,
Engr. Nabeel Ahmed Siddiqui
CAD/CAM/CNC Instructor
Dawood University of Engineering & Technology, Karachi, Sindh, Pakistan
I'm working as a CAD/CAM/CNC instructor in an engineering university namely Dawood University of Engineering & Technology (Formerly Dawood College of Engineering & Technology) situated in Karachi, Sindh, Pakistan. We had purchased three (3) Denford CNC Machines in 2006 namely MICROMILL, MICROROUTER COMPACT and MICROTURN.
After installing the software VR Milling and providing the license key (SecKey.tff), the software installs successfully. But, when we connect the machine via software it will give some software interfacing caution with the hardware (i.e. MICROMILL & MICROROUTER COMPACT). Please refer to the screenshots attached.
Kindly help me as we are an educational institution and providing CAD/CAM/CNC training to the engineering students.
Thank you in advance. Waiting for an early response.
Regards,
Engr. Nabeel Ahmed Siddiqui
CAD/CAM/CNC Instructor
Dawood University of Engineering & Technology, Karachi, Sindh, Pakistan