Easiturn 3 leadscrew pitches?

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Egon
Posts: 16
Joined: Mon 30 Dec , 2013 19:59 pm

Easiturn 3 leadscrew pitches?

Post by Egon » Sun 05 Jan , 2014 20:12 pm

Trying to set my steppers up and don't know what the leadscrew pitches are for the easiturn3. Does anyone know what they are?

Egon

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Easiturn 3 leadscrew pitches?

Post by angel-tech » Sun 05 Jan , 2014 21:47 pm

5mm

Egon
Posts: 16
Joined: Mon 30 Dec , 2013 19:59 pm

Re: Easiturn 3 leadscrew pitches?

Post by Egon » Sun 05 Jan , 2014 23:59 pm

Thanks, is that for both the Z and X axis?

Egon

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Easiturn 3 leadscrew pitches?

Post by angel-tech » Mon 06 Jan , 2014 0:53 am

yes.

25mm x 5mm on the Z
16mm x 5mm on the x

Post Reply