Easimill 3 overcurrent

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
BaBa
Posts: 2
Joined: Mon 12 Sep , 2011 15:18 pm
Hardware/Software: Easimill 3

Easimill 3 overcurrent

Post by BaBa » Mon 12 Sep , 2011 16:16 pm

I recently got my hands on a 1986 Easimill 3 240V varispeed.

The problem i am having is a spindle overcurrent ,shows as a spindle fault on the screen and OC on the KEB combivert.

Has anyone got diagram A3-200079 and 80?

I think they will be similar to 59 and 60 but not sure.

I have checked the motor resistance from the KEB each phase is 3.5 ohms and insulation resistance is ok.
Should i be able to get this reading thru the contactors when the machine is not powered or do i have a problem with a contactor?

The guy who sold it to be insists it all worked before i took delivery so i have to assume somthing has died during transport, all three steppers the screen and keyboard seem to be working ok.

I want to get it all working before i start conversion to mach 3, any help you can offer would be great.
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Easimill 3 overcurrent

Post by Denford Admin » Tue 13 Sep , 2011 9:11 am

A3 200079 is the last page in this:
viewtopic.php?f=34&t=3420
Top
BaBa
Posts: 2
Joined: Mon 12 Sep , 2011 15:18 pm
Hardware/Software: Easimill 3

Re: Easimill 3 overcurrent

Post by BaBa » Tue 13 Sep , 2011 22:22 pm

Thanks for the info, will have a look at it this weekend :)
Top
Post Reply

Return to “EasiMill / EasiTurn”