easiturn proximity switch

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
stevewatson
Posts: 18
Joined: Mon 23 Mar , 2009 10:29 am

easiturn proximity switch

Post by stevewatson » Sat 10 Jul , 2010 9:55 am

Hi all

does anybody know the part number for the proximity sensors on an easiturn. i no its got an m8 thread an is 22.5 mm long but i dont seem to be getting anywhere with that info. its the one off the x axis. any help would be apreciated.

Cheers

Steve
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: easiturn proximity switch

Post by Denford Admin » Mon 12 Jul , 2010 10:00 am

Is it the same as the ones on the Triac ?
viewtopic.php?f=47&t=2621
Top
stevewatson
Posts: 18
Joined: Mon 23 Mar , 2009 10:29 am

Re: easiturn proximity switch

Post by stevewatson » Mon 12 Jul , 2010 14:03 pm

yes it is thankyou very much. i ve just ordered one from balluf. Thanks for your reply
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: easiturn proximity switch

Post by Denford Admin » Tue 13 Jul , 2010 14:57 pm

Sorry to tell you this now, but we've just found a bunch of new ones
viewtopic.php?f=13&t=2932
Top
Post Reply

Return to “EasiMill / EasiTurn”