Hi,
has anyone got a copy of the parameters for this machine?
parameter 1320 & 1321 would help to start with, I'm trying to work out if the X axis is 0.000 at ref position and X-178.000 to spindle centreline or 178.000 at ref and 0.000 at spindle centreline.
thanks,
Chris.
Cyclone with Fanuc 21iT
Moderators: Martin, Steve, Mr Magoo
-
chris.wilkinson
- Posts: 6
- Joined: Wed 28 Nov , 2012 16:57 pm
- Hardware/Software: Denford cyclone with fanuc 21iT control.
Re: Cyclone with Fanuc 21iT
Hi Chris
Have you got the serial number of the Cyclone.
Have you got the serial number of the Cyclone.