Page 1 of 1
Cyclone P 21i and Triac 21i electrical diagrams needed
Posted: Sun 09 Jul , 2017 9:01 am
by Synchrocnc
Hello,
New to the forum and just bought a Triac and Cyclone P, both with Fanuc 21i.
I do not have any electrical diagrams or parts lists for either machine and was wondering if anybody out there has any.
Many thanks in advance
Alan
Re: Cyclone P 21i and Triac 21i electrical diagrams needed
Posted: Mon 02 Oct , 2017 0:11 am
by ti nut
Hi Alan,
Found electrical drawings for Cyclone Fanuc 21i (1999) whilst looking for Fanuc 0T-C drawings.
Only a few months late but hope it helps!
Re: Cyclone P 21i and Triac 21i electrical diagrams needed
Posted: Sat 07 Oct , 2017 22:49 pm
by Synchrocnc
Thanks very much, you are a star.
My patience has been rewarded.
Re: Cyclone P 21i and Triac 21i electrical diagrams needed
Posted: Tue 24 Sep , 2019 10:22 am
by Martin
It may be best to monitor the inputs on the Fanuc 21I.
X7.0 = Position Bit 1
X7.1 = Position Bit 2
X7.2 = Position Bit 3
X7.3 = Position Bit 4
X7.4 = turret Clamp Signal
X7.5 = Strobe
X7.7 = Thermal Switch.
Re: Cyclone P 21i and Triac 21i electrical diagrams needed
Posted: Wed 04 Nov , 2020 15:30 pm
by SimonRafferty
Here are the above DWG files converted to PDF & compiled in a single document.