Harrison TU150U with Baldor servo

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 221
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

Re: Harrison TU150U with Baldor servo

Post by Lone_Ranger » Sun 07 May , 2017 16:49 pm

I used to own 2 Denford Cyclone Lathes :)

The X axis should show a movement of 2mm when a 1mm cut is programmed, this is because it is working in "diameter mode" which is correct as it should be showing the actual diameter of the material, remember a 1mm depth of cut (X axis movement) will in reality remove 2 mm from the actual diameter of the material, this is normal for most CNC Lathes :) :)

Regards
Rob

Edis
Posts: 25
Joined: Fri 19 Aug , 2016 7:04 am
Hardware/Software: Harrison TU150U -96

Re: Harrison TU150U with Baldor servo

Post by Edis » Sun 07 May , 2017 17:13 pm

Thanks, I hoped it was like that :D

This is my first test in the machine!! I´m happy now :D
Image

Edis
Posts: 25
Joined: Fri 19 Aug , 2016 7:04 am
Hardware/Software: Harrison TU150U -96

Re: Harrison TU150U with Baldor servo

Post by Edis » Sun 07 May , 2017 22:16 pm

Made a little video too:
https://www.youtube.com/watch?v=vJHr4TvEr2M

I just entered a program from the manual to test, so don´t ask what it is :D

Post Reply