Cyclone Air Chuck

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
jaycnc
CNC Apprentice
CNC Apprentice
Posts: 59
Joined: Wed 27 Aug , 2008 13:27 pm
Location: chesterfield

Cyclone Air Chuck

Post by jaycnc » Tue 03 Nov , 2009 0:02 am

I have an original Cylone Air chuck made by Leader with about 70 collets with a mix of both round and hex type.
Some of the collets are the same size but their is atleast one full set of round and nearly a full set of hex and most are all ok with the odd one needing new plastic spacers.
Im thinking of putting this up for sale but iv no idea what to ask for it so any suggestions please????
It has got the foot pedal as well.

thanks
jay

jaycnc
CNC Apprentice
CNC Apprentice
Posts: 59
Joined: Wed 27 Aug , 2008 13:27 pm
Location: chesterfield

Re: Cyclone Air Chuck

Post by jaycnc » Tue 03 Nov , 2009 21:53 pm

Anyone with any idea at all of what its worth please?

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: Cyclone Air Chuck

Post by Triac whizz » Mon 09 Nov , 2009 12:49 pm

Perhaps if we saw a picture of it....
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Cyclone Air Chuck

Post by Denford Admin » Mon 09 Nov , 2009 12:54 pm

We asked the Pratt Burnerd rep. on Friday but he had no idea- sorry!

jaycnc
CNC Apprentice
CNC Apprentice
Posts: 59
Joined: Wed 27 Aug , 2008 13:27 pm
Location: chesterfield

Re: Cyclone Air Chuck

Post by jaycnc » Mon 09 Nov , 2009 22:34 pm

Triac whizz wrote:Perhaps if we saw a picture of it....

Will take some pics tomorrow and post them :)

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: Cyclone Air Chuck

Post by Triac whizz » Wed 18 Nov , 2009 13:28 pm

with eager anticipation, we wait...

sounds like yoda talk :roll:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

Post Reply