X axis not connected

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Bolan41
Posts: 12
Joined: Mon 29 Aug , 2022 10:31 am
Hardware/Software: Denford Cyclone/Alphacam

X axis not connected

Post by Bolan41 » Thu 13 Apr , 2023 9:24 am

Hi all
had a break in my X axis encoder cable so have swopped it over for one of the spare wires that's in the core, now getting a message X axis not connected. So first i need to know if i have plugged it in to the correct socket as i forgot to take a photo of where it came from on the board. Can anyone help Thanks
Top
Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: X axis not connected

Post by Martin » Sat 22 Apr , 2023 15:22 pm

Can you post a picture of where you have connected it to & the spare plugs in the area.
Top
Bolan41
Posts: 12
Joined: Mon 29 Aug , 2022 10:31 am
Hardware/Software: Denford Cyclone/Alphacam

Re: X axis not connected

Post by Bolan41 » Tue 30 May , 2023 13:22 pm

Image
Attachments
IMG_9374.jpg
IMG_9374.jpg (637.96 KiB) Viewed 6621 times
Top
Bolan41
Posts: 12
Joined: Mon 29 Aug , 2022 10:31 am
Hardware/Software: Denford Cyclone/Alphacam

Re: X axis not connected

Post by Bolan41 » Tue 30 May , 2023 13:23 pm

Hi Martin

It's the plug with no numbers on.

Thanks
Rob
Top
Post Reply

Return to “Cyclone”