Does anyone happen to have the circuit diagrams or electrical drawings for the control gear in the back of the cabinet on a June 2014 PCB Engraver? It has a nextmove with USB, a z-axis driver, a chunky toroidal transformer and the custom Denford relay/power supply PCB. (See below)
Many Thanks,
Gillian
Circuit Diagrams
Moderators: Martin, Steve, Mr Magoo
-
GillianS
- Posts: 15
- Joined: Wed 12 Jul , 2023 22:41 pm
- Hardware/Software: Novamill 1997, PCB Engraver 2014
Circuit Diagrams
- Attachments
-
- IMG_20240110_005735~2.jpg (356.11 KiB) Viewed 219 times
-
GillianS
- Posts: 15
- Joined: Wed 12 Jul , 2023 22:41 pm
- Hardware/Software: Novamill 1997, PCB Engraver 2014
Re: Circuit Diagrams
In getting it going, I found the IDC connector was not making good contact and the machine could not home the Z axis so would never complete the homing sequence. A new connector on the old cable and a little IPA on the pins worked wonders. Once the z-axis stepper driver received a good step signal, the machine could home and become ready.