Micromill and Techsoft 2D Design
Moderators: Martin, Steve, Mr Magoo
Micromill and Techsoft 2D Design
How do I add my micromill to the CNC outputs on my 2 D Design software. I have down loaded the Denford extension but dont know how to use it. The micromill has been gathering dust for somtime. Is it worth upgrading and how much will that cost? it is a 2001 version.
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Just install the Denford Extensions from what you have downloaded
In Techsoft 2D if you go to FILE > PLOT Arrow down in PLOTTING DEVICE, scroll up you should see
Denford Micromill (Link)
Denford Micromill 2000 (Link)
E mail your Micromill Serial No to service@denford.co.uk and we will be in touch
In Techsoft 2D if you go to FILE > PLOT Arrow down in PLOTTING DEVICE, scroll up you should see
Denford Micromill (Link)
Denford Micromill 2000 (Link)
E mail your Micromill Serial No to service@denford.co.uk and we will be in touch
You also need a Techsoft update.
2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it
viewtopic.php?t=11
2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it
viewtopic.php?t=11