This guide shows how to manufacture F1 R-type cars from a 3D design, using Denford supplied software.
Check the https://www.f1inschools.co.uk website for more recent information, design tutorials and rules.
https://www.denfordata.com/downloads/f1/ ... esktop.pdf
(11Mb .pdf file)
Site Admin
Here also, are some guides to designing the cars in Solidworks (tm)
https://www.denfordata.com/downloads/f1/ ... pe-Car.pdf
https://www.denfordata.com/downloads/f1/ ... v2_ENG.pdf
NB, If you are competing in the F1 In Schools challenge, then please check for the latest rules and regulations...these guides are for reference only and may use sizes and features that are not within current regulations
https://www.denfordata.com/downloads/f1/ ... pe-Car.pdf
https://www.denfordata.com/downloads/f1/ ... v2_ENG.pdf
NB, If you are competing in the F1 In Schools challenge, then please check for the latest rules and regulations...these guides are for reference only and may use sizes and features that are not within current regulations