VR Milling v6.16 released 21st February 2024
Posted: Wed 21 Feb , 2024 15:24 pm
VR Milling v6.16 released 21st February 2024
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
// 21st February 2024
Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version.
The F1 Router has been renamed to be MCR 100
The model of the MCR 100 in the simulator is now correct, and doesn't use the Compact 1000 model anymore
It was possible on the Microrouter and VMC to exceed the maximum spindle revs by moving the override over 100%. The maximum cannot be exceeded now.
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
// 21st February 2024
Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version.
The F1 Router has been renamed to be MCR 100
The model of the MCR 100 in the simulator is now correct, and doesn't use the Compact 1000 model anymore
It was possible on the Microrouter and VMC to exceed the maximum spindle revs by moving the override over 100%. The maximum cannot be exceeded now.