VR Milling v5.30 released 30th Sep 2009
Posted: Wed 30 Sep , 2009 15:56 pm
As usual, get the latest version from here:
http://www.website.denford.ltd.uk/suppo ... -downloads
v5.30 - Gerber reader changes to read multiple commands on each line (denoted by * in the .gbx file)
v5.30 - Made the machine disk save the .MAT file and read it back in. will work ok if you aren't creating a machine disk for a new machine name, and using the usual vrmilling5.MAT file in docs&settings\username\appdata\denford
v5.30 - Updated DenVRXM.ocx in C:\WINDOWS\system32 to use new denford logo
Updated VR machine .dll files to display new logo correctly
Changed micromill VR machine to increase working area - it was limited to table size which inhibited the max. billet size when in simulation without any apparent reason
v5.30 - Updated VMC manual in .pdf included
http://www.website.denford.ltd.uk/suppo ... -downloads
v5.30 - Gerber reader changes to read multiple commands on each line (denoted by * in the .gbx file)
v5.30 - Made the machine disk save the .MAT file and read it back in. will work ok if you aren't creating a machine disk for a new machine name, and using the usual vrmilling5.MAT file in docs&settings\username\appdata\denford
v5.30 - Updated DenVRXM.ocx in C:\WINDOWS\system32 to use new denford logo
Updated VR machine .dll files to display new logo correctly
Changed micromill VR machine to increase working area - it was limited to table size which inhibited the max. billet size when in simulation without any apparent reason
v5.30 - Updated VMC manual in .pdf included