Page 1 of 1
WHAT ARE THE SYSTEM / COMPUTER REQUIREMENTS FOR VR MILLING 5
Posted: Thu 25 May , 2006 13:13 pm
by Steve
WHAT IS THE MINIMUM SPEC SOMPUTER REQUIRED TO RUN VR MILLING 5?
Posted: Thu 25 May , 2006 13:14 pm
by Steve
System Requirements
IBM or 100% Compatible PC
3 1/2 Inch Floppy Drive (for registration disk)
Pentium III 500Mhz
128Mb RAM
Microsoft Windows 98 and above
CD-ROM Drive
50Mb free Hard Disc space
Open GL 3D Accelerator Graphics Card with 32Mb VRAM supporting 1024x768 resolution
Single Users :
'Single User' version requires 1 x free parallel port (for security dongle)
For Machine Interface :
RS232 machine interface requires 1 x free serial port
USB (optional) machine interface requires 1 x free USB port plus Windows XP/NT/2000 operating system
Posted: Thu 12 Feb , 2009 16:48 pm
by Denford Admin
NB - The USB machine control aspect of the software will NOT work on 64-bit operating systems like Vista 64bit
This is because 32 bit USB device drivers are not supported on Vista 64.
However, there is a possibility that RS232 machine communication would work but we have not tested this yet.