'Invalid image format" error
Moderators: Martin, Steve, Mr Magoo
-
bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
'Invalid image format" error
I get a 'Invalid image format" when trying to install VrR Milling Ver 2.** on a lap top running Windows XP Professional
Last edited by bradders on Wed 17 Oct , 2007 15:08 pm, edited 1 time in total.
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
This would mean that you have selected the wrong machine to connect to in vr milling.
check main title bar of window says: Virtual Reality CNC Milling - MyMachineTypeNS
Try changing the control type if the machine type is definitely correct - (Menu:Setup Machine Parameters - denny, Communications) either from 7 to 9 or vice versa
check main title bar of window says: Virtual Reality CNC Milling - MyMachineTypeNS
Try changing the control type if the machine type is definitely correct - (Menu:Setup Machine Parameters - denny, Communications) either from 7 to 9 or vice versa