Stock: Acrylic
Stock Size: 4 in. x 2.75 in. x .25 in.
Cutter Size: 1/64 in. engraver
denford.fnc
VR Milling Vr Turning example G code files
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
VR Milling Vr Turning example G code files
Milling Program - the denford.fnc file is the perfect sample part to run on any Denford milling machine.
Stock: Acrylic
Stock Size: 4 in. x 2.75 in. x .25 in.
Cutter Size: 1/64 in. engraver
denford.fnc
Stock: Acrylic
Stock Size: 4 in. x 2.75 in. x .25 in.
Cutter Size: 1/64 in. engraver
denford.fnc
Last edited by Denford Admin on Wed 24 Jan , 2007 17:15 pm, edited 1 time in total.
-
Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Router Program - the router.fnc file has been created to run on a Denford CNC router.
Stock: Wood (or similiar)
Stock Size: At least 5 in. x 5 in. x .25 in.
Cutter Size: 1/8-inch end mill
router.fnc
Stock: Wood (or similiar)
Stock Size: At least 5 in. x 5 in. x .25 in.
Cutter Size: 1/8-inch end mill
router.fnc
Last edited by Denford Admin on Wed 24 Jan , 2007 17:15 pm, edited 1 time in total.
-
Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Lathe Program - the lathe.fnc has been created to run on a Denford CNC Lathe.
Stock: Aluminum
Stock Size: .75 in. D. x 2 in.
lathe.fnc
Stock: Aluminum
Stock Size: .75 in. D. x 2 in.
lathe.fnc