Electrical diagrams Cyclone TU150E and Triac Machines
Moderators: Martin, Steve, Mr Magoo
Electrical diagrams Cyclone TU150E and Triac Machines
Hello
We have in the University UTP in Mexico ,one Cyclone TU150E Serial:E0 4480/3, Serial No. of electronics: OC 0017454 and one Triac VMC serial:E0 4480/1 with serial No. of electronics: OC 0017451, we want to made the integratión using one Fanuc Robot, but we do not have de electrical diagrams, I would like to get them but Do you have available that information?. and the manuals of this machines.?
I hope anybody can help us
BYE
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Note ! These 2 machines can be upgraded (if they are initially in full working order) to run VR Milling Ver 5 and VR Turning Ver 1 software. Our agent in Mexico is Harry Mazal
Harry Mazal, S.A. de C.V.
Laguna de Tamiahua No.204
Col. Anahuac, Del. Miguel Hidalgo
11320 Mexico, D.F.
Mexico
Tel 00 52 55 53961133
Harry Mazal, S.A. de C.V.
Laguna de Tamiahua No.204
Col. Anahuac, Del. Miguel Hidalgo
11320 Mexico, D.F.
Mexico
Tel 00 52 55 53961133
Thank you by your soon answer
The Cyclone and the Triac VMC have Despatch date: October 1994 Those drawings are compatibles?
I saw in the files the seccion of additional I/O , it mention 2 Aux Input,1,2 and 2 Aux Output 1,2, there is a Produc Manual o where explain the function of signal of the additional I/O and each component?
Bye
The Cyclone and the Triac VMC have Despatch date: October 1994 Those drawings are compatibles?
I saw in the files the seccion of additional I/O , it mention 2 Aux Input,1,2 and 2 Aux Output 1,2, there is a Produc Manual o where explain the function of signal of the additional I/O and each component?
Bye
- Denford Admin
- Site Admin
- Posts: 3636
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
-
- Posts: 7
- Joined: Mon 28 Jun , 2010 8:46 am
- Hardware/Software: Novaturn 1996
AVA/3 Series
Electronics S/N: OC00134770
Software version: 1.41
TRIAC VMC
S/N: EO 3748
Dispatch Date: NOV 1990
Export No: 3748 - Location: Chattanooga, Tennessee USA
Re: Electrical diagrams Cyclone TU150E and Triac Machines
Hello,
Do you know if the schematics for the Triac VMC 1990 model is the same as your downloadable 1993 version? If not, do you know where I might obtain the correct verison? To the best of my knowledge, my machine was a DOS run unit.
Thanks,
JRennich
Do you know if the schematics for the Triac VMC 1990 model is the same as your downloadable 1993 version? If not, do you know where I might obtain the correct verison? To the best of my knowledge, my machine was a DOS run unit.
Thanks,
JRennich
- Denford Admin
- Site Admin
- Posts: 3636
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Electrical diagrams Cyclone TU150E and Triac Machines
Why not download them and see if it matches, or is close ?
Unfortunately, the people around in 1990 who knew exactly what was what, no longer work for Denford
- we do our best to provide (free) information from what remains here in the old filing cabinets, but we simply don't know what different variations of hardware and software were being used 20 years ago.
Unfortunately, the people around in 1990 who knew exactly what was what, no longer work for Denford
- we do our best to provide (free) information from what remains here in the old filing cabinets, but we simply don't know what different variations of hardware and software were being used 20 years ago.