The electrical drawings for the Mirac PC circa 1994.
This is the one with a GSM LCB3 control slave board
https://www.denfordata.com/downloads/dos ... m-lcb3.pdf (500Kb)
Mirac PC circa 1994 Electrical Schematic GSM-LCB3
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3642
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact: