New PNC update for easyDnc4.0

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
easydnc
Posts: 5
Joined: Wed 04 Jul , 2007 20:21 pm
Location: easydnc.com

New PNC update for easyDnc4.0

Post by easydnc » Wed 11 Jul , 2007 18:03 pm

Hi, I'm Ian. Tech Support Manager at easyDnc.com

We've just released a version of easyDnc which has built in support for NEE/PNC controls.

easyDnc can send to CNC memory or drip feed programs of any size. One of the nicer features is the quick switching between memory or drip feed modes.

There's still a couple of things we'd like to improve so any feedback is more than welcome. Here's one:-

If there's a data error. For example a communications error or an error in your program then the CNC will reject the relevant line. At that point easyDnc will stop and display an error message asking you to retry or cancel. If you retry then the same line will be sent to the control. We'd like to improve this in future so that easyDnc retries automatically a number of time before displaying the error message.

There's a couple of other things like that and with feedback from users we'll have those improved in no time.


You can get the software download at www.easydnc.com it's a 60 day trial. Full version costs just £100 ($190) and we're more than happy to give discounts to everyone who gives us some feedback helping us to improve the product.

Thanks
Ian
www.easydnc.com

Post Reply