Viceroy TSD1 (TDS) Manual available to download

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Viceroy TSD1 (TDS) Manual available to download

Post by Denford Admin » Tue 15 Aug , 2006 15:23 pm

The (purple) front cover says:
Model T.D.S 1/1 G.B Metal Turning Lathe
Download the ZIP files here:

https://www.denfordata.com/downloads/dos ... manual.zip

User avatar
CHS Viceroy
Posts: 3
Joined: Tue 29 May , 2007 20:16 pm

Viceroy tds 2

Post by CHS Viceroy » Tue 29 May , 2007 20:22 pm

Is the manual for the TDS 2 available for download any where.

jim

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Wed 30 May , 2007 9:09 am

Sorry - - not seen anything lying around for a TDS2.

I have snapped the 280vs manual and added to the downloads section - if thats any use ?

Andy B
CNC Guru
CNC Guru
Posts: 396
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: Viceroy tds 2

Post by Andy B » Wed 30 May , 2007 16:33 pm

CHS Viceroy wrote:Is the manual for the TDS 2 available for download any where.

jim
Jim,
Is there much difference between the TDS 1 and TDS 2, apart from the shape of the headstock?
I'm compiling a comparison of parts lists/drawings between the 5" machine and the various 5.5" machines.
There were a lot of parts carried over from model to model, so sometimes it feels like a game of 'spot the difference'! Any pointers would be useful.
(see my post in 'Archives', after my recent visit to Denford).

Andy

User avatar
CHS Viceroy
Posts: 3
Joined: Tue 29 May , 2007 20:16 pm

tds1 tds2

Post by CHS Viceroy » Wed 30 May , 2007 22:49 pm

Hi Andy,

Dont really know if there is any differance 'inside', I was hoping for a manual to see if it has any maintenance routine for this lathe, or just follow as per tds1.

jim

Post Reply