A Bridgeport Interact with tooling for £425 !

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

A Bridgeport Interact with tooling for £425 !

Post by Denford Admin » Mon 22 Feb , 2010 11:38 am

My cousin-in-law asked me to come look at this Bridgeport he got recently from auction...£425 with lots of tooling !!

At first I just couldn't remember how to use the Heidenhain, but it all came back in the end - if I get time, I'll try making some notes on all the oddities that make the control difficult to use (even with the books!)
Attachments
Bridgeport Interact-TNC355.jpg
Bridgeport Interact-TNC355.jpg (78.43 KiB) Viewed 5395 times
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: A Bridgeport Interact with tooling for £425 !

Post by Triac whizz » Mon 22 Feb , 2010 18:32 pm

Just trying to make us jealous eh! :dumbfounded:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: A Bridgeport Interact with tooling for £425 !

Post by Denford Admin » Mon 22 Feb , 2010 18:38 pm

Well, I couldn't help think about the old denford machines going for more than that on eBay!
Top
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Re: A Bridgeport Interact with tooling for £425 !

Post by Triac whizz » Tue 23 Feb , 2010 23:39 pm

but don't forget that Denford machines are much better quality that's why they have a higher resale value.
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: A Bridgeport Interact with tooling for £425 !

Post by Denford Admin » Wed 24 Feb , 2010 10:06 am

:lolol:

The support from this forum must be a major contributor to resale value then!
Top
Post Reply

Return to “User Stories / Projects / Courseware”