Request for TDS/PCS Lathe Coolant Tank Drawings or Info

[Taylon]

Hello to you all,

Can anyone one here help me as I need to make a replacement coolant tank for this lathe I have re-built which is missing a coolant tank and accessories. What is needed is some engineering drawings or dimensioned sketches of and an actual tank so I can make a replacement. Or someone sell me one from a decommissioned Denford TDS lathe.

Any advice or help would be appreciated.

Kindest regards, John R.

[Andy B]

John,

if you look through the parts lists here:
https://www.denfordata.com/downloads/for ... imised.pdf

and here

viewtopic.php?f=50&t=2961

to find out the relevant drawing numbers, it will make locating the drawings a bit easier.

Andy

[Taylon]

Dear Andy,

Thank you for the links and I have now found the drawing numbers for the parts for the compound idler gears and the coolant parts from the link to the topic post.

Are the following drawing available:?

ML100/152
" /998
" /997
" /132
" /208A
" /214A
" /219

If so where can the drawings be downloaded or acquired?

Kindest regards, John R.