Orac Internals

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
xzibit206
Posts: 6
Joined: Mon 22 Feb , 2010 10:00 am

Orac Internals

Post by xzibit206 » Mon 22 Feb , 2010 11:26 am

Due to a retrofit of a denford orac lathe I am selling all of the electrical boards along with the visual display unit, tape deck, power supplies and the cassette deck. All parts are original to the best of my knowledge and have been carefully removed and stored in a water proof environment.

If you require a specific part then please post and I'll get back to you. I am looking for 10 quid per board or part plus postage. If you are after multiple parts then I'm sure we can come to some deal :)

ricky b
Posts: 9
Joined: Thu 15 Oct , 2009 15:44 pm

Re: Orac Internals

Post by ricky b » Thu 15 Jul , 2010 10:05 am

Hi do you still have any parts for sale I am after the parker digiplan drive boards if you still have them, thanks Rich

xzibit206
Posts: 6
Joined: Mon 22 Feb , 2010 10:00 am

Re: Orac Internals

Post by xzibit206 » Mon 22 Nov , 2010 11:18 am

Finally got around to removing the parts from my lathe and posting them on ebay

http://shop.ebay.co.uk/?_from=R40&_trks ... +CNC+Lathe

I will be posting all internal parts in the coming weeks, including the visual display unit etc.

seaman77
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 19 Apr , 2010 9:18 am
Hardware/Software: two Triacs one Orac.
Location: Ellada

Re: Orac Internals

Post by seaman77 » Sat 17 Aug , 2013 8:51 am

...I am looking for the old key board. Do you still have it?

seaman77
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 19 Apr , 2010 9:18 am
Hardware/Software: two Triacs one Orac.
Location: Ellada

Re: Orac Internals

Post by seaman77 » Sat 10 May , 2014 13:13 pm

...I am trying to understand what do they say . But, I have to wait until I learn Russian.

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Orac Internals

Post by angel-tech » Sat 10 May , 2014 23:09 pm

spam

seaman77
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 19 Apr , 2010 9:18 am
Hardware/Software: two Triacs one Orac.
Location: Ellada

Re: Orac Internals

Post by seaman77 » Wed 14 May , 2014 14:36 pm

...never mind. I still hope to find someone who wants to sell the keyboard

Post Reply