Wanted - Autolock collet
Moderators: Martin, Steve, Mr Magoo
-
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Wanted - Autolock collet
A long shot - but someone may know of one lurking in a dusty cupboard....
I need a 25mm collet to fit a Clarkson Autolock chuck for my Tom Senior mill.
The 30INT chucks were called 'large' by Clarksons - but they used a smaller size of collet than the 'large' chucks on the 40INT tapers (which are commonly available) - hence some people call these 'medium' collets!
Confused?
I've uploaded a catalogue extract here
The one I need is a '40097' - the outside diameter is around 1 3/8".
These would also have been used on R8 taper machines (e.g. Bridgeports and clones) - but they seem to be very scarce.
Any leads appreciated.
Andy
I need a 25mm collet to fit a Clarkson Autolock chuck for my Tom Senior mill.
The 30INT chucks were called 'large' by Clarksons - but they used a smaller size of collet than the 'large' chucks on the 40INT tapers (which are commonly available) - hence some people call these 'medium' collets!
Confused?
I've uploaded a catalogue extract here
The one I need is a '40097' - the outside diameter is around 1 3/8".
These would also have been used on R8 taper machines (e.g. Bridgeports and clones) - but they seem to be very scarce.
Any leads appreciated.
Andy
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
have found 25 mm collet yet
-
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Wanted - Autolock collet
No - still looking for one.
Andy
Andy
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
I think i found one it is 1.375 aprox with two small wings .
and it is metric. if you want it i well sell it for 20£ puss post
and it is metric. if you want it i well sell it for 20£ puss post
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
i ment 10£
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
i ment 10£
-
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Wanted - Autolock collet
Norm,
Have sent you a private message.
Has your collet got a groove in the edge of the 'wings' - that indicates a metric size.
Thanks,
Andy
Have sent you a private message.
Has your collet got a groove in the edge of the 'wings' - that indicates a metric size.
Thanks,
Andy
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
yes it has
-
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Wanted - Autolock collet
Norm - did you get my message?
Andy
Andy
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
no i have not andy
-
- CNC Guru
- Posts: 396
- Joined: Mon 20 Nov , 2006 18:19 pm
- Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
- Location: East Midlands, UK
Re: Wanted - Autolock collet
Norm - have sent you another pm.
I need your contact details - and ideally a photo of the collet just to conform it is what I'm after.
Andy
I need your contact details - and ideally a photo of the collet just to conform it is what I'm after.
Andy
-
- Posts: 19
- Joined: Wed 06 Feb , 2013 19:55 pm
- Hardware/Software: tr harrison 600 trainer ver 1.03 starmill pc fanuc ver 2.69
Re: Wanted - Autolock collet
hi andy my email address norman.royds@talktalk.net