Novaturn

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3595
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Novaturn

Post by Denford Admin » Thu 24 Aug , 2006 21:59 pm

Another long running desktop machine from Denford

Image

TDIPower
CNC Guru
CNC Guru
Posts: 547
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: Novaturn

Post by TDIPower » Tue 20 May , 2014 22:38 pm

What is the purpose of the tail stock on the lathes when you can't operate them with the lid shut?

Cheers

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1316
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Novaturn

Post by Steve » Tue 20 May , 2014 22:42 pm

It can be used to support a longer part and for turning between centres.

TDIPower
CNC Guru
CNC Guru
Posts: 547
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: Novaturn

Post by TDIPower » Wed 21 May , 2014 20:26 pm

I must be going blonde in my old age! It's only the other day I was actually doing some between centres and with a steady mounted at half way on the big lathe at work.

Cheers

Pete

Post Reply