** Tristar ** - the bubble gum machine !!!!!!!!!!!

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3595
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

** Tristar ** - the bubble gum machine !!!!!!!!!!!

Post by Denford Admin » Thu 24 Aug , 2006 21:50 pm

God knows what happened to this :?: anyone got one :?: :?: :?:


Image

HunterScotty
Posts: 7
Joined: Sat 02 Dec , 2006 21:12 pm
Location: Scotland
Contact:

Post by HunterScotty » Sun 03 Dec , 2006 14:58 pm

This is the one!!!

I've seen the shell of one of these when I was a student! - Weird Looking thing!!!

User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Tue 05 Dec , 2006 12:45 pm

They must have been important - anyone got a copy of the journal?

http://www.direct.bl.uk/bld/PlaceOrder. ... archengine

User avatar
Denford Admin
Site Admin
Posts: 3595
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Tue 05 Dec , 2006 12:58 pm

A 7 page article - amazing !

Someone said they have seen a Tristar lying around in the sheds here - I'll have a look

User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Tue 05 Dec , 2006 14:09 pm

Someone said they have seen a Tristar lying around in the sheds here - I'll have a look
Lying round the shed - you have these sort of things lying round - don't let me near there - I would be in heaven!!!

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Tue 05 Dec , 2006 15:06 pm

If you find it I'll take it off your hands, that'll be a good talking point on the mantelpiece

...bubblegum machine...
can it be converted to take euros :lol:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1318
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 05 Dec , 2006 18:00 pm

We have allsorts lying round in the sheds :cry:

I will ask Admin to photograph some of the obsolete stock and post the picks.

We dont want to go through all the bits but if someone wanted to Ebay the lot they could make some money at it, we just dont have time! :!:

There are several old controls servo motors, turrets ac motors contactors etc...etc...

We will sell a job lot for a few grand!!

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Tue 05 Dec , 2006 18:40 pm

consider me interested....
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1318
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 05 Dec , 2006 19:19 pm

We have cleared out the stores and keep holding onto stuff thats too good to throw out :?
Trouble is it never gets used and we dont have a full inventry of what we have or if it works.
We also have an old bar store with racks and materials that have been here for years.

anyone interested can come and have a look round then make a bid.

You will need a big van though :shock:

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Tue 05 Dec , 2006 19:31 pm

You will need a big van though
got one of those already :lol:

how do you think all my toys got here!
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
davidimurray
CNC Expert
CNC Expert
Posts: 194
Joined: Thu 24 Aug , 2006 9:45 am

Post by davidimurray » Wed 06 Dec , 2006 9:41 am

If I had the room I would be up there like a flash - don't think my other half would be too happy though - I might be getting a motorbike to strip to sell in the next few weeks and I don't know if she has realised it is going in the house!!!!

Triac Whizz - you can open up the Denford supply store!!

Cheers

Dave

Post Reply