Possible to operate in alternate orientation?

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
mike.sheard
Posts: 1
Joined: Tue 05 Apr , 2011 12:22 pm

Possible to operate in alternate orientation?

Post by mike.sheard » Tue 05 Apr , 2011 13:19 pm

Does anyone know if this Milling Head can be operated with the centreline oriented horizontally, and vertically upwards, as well as the usual vertically downwards direction please? It is circa 1952 manufacture, apparently grease lubricated, two speed (290 / 585 RPM) 25/50hp.
Thanks
Attachments
05042011 -2.jpg
05042011 -2.jpg (94.63 KiB) Viewed 5474 times
05042011-4.jpg
05042011-4.jpg (93.87 KiB) Viewed 5474 times
05042011-3.jpg
05042011-3.jpg (99.5 KiB) Viewed 5474 times
05042011.jpg
05042011.jpg (99.5 KiB) Viewed 5474 times

Post Reply