Old Fitting Shop

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
VIC
Posts: 2
Joined: Sat 21 Jul , 2007 18:51 pm
Location: SKIPTON

Old Fitting Shop

Post by VIC » Fri 04 Apr , 2008 20:04 pm

If you have an old 'VICEROY' metal lathe, you may like to see how and where it was made from this photograph.
It dates from the late 1960's, the two lathes in the foreground are scewcutter lathes (TDS.1 LS) and the one's further back are gearbox lathes(TDS.1/1 GB).
The only fitter to be seen was called Billy Hall.
If you would like to know more about the contents of this picture, just ask!!

From ian vickery
Attachments
Fitting Shop.jpg
The old fitting shop
Fitting Shop.jpg (316.57 KiB) Viewed 6303 times

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Mon 07 Apr , 2008 7:30 am

Hi Ian,

How are you doing? hope you are keeping OK. Great picture by the way

Regards

Graham Bradley

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1318
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Tue 08 Apr , 2008 13:43 pm

Now the area is used for packing and storage.

What it looks like today :!:
Attachments
DSCF0983.jpg
DSCF0983.jpg (114.26 KiB) Viewed 6259 times

Post Reply