Hi all
Can anyone tell me how to set the correct datum points on the novamill, QuickCam 2D Design/VR Milling V5?
Machine keeps coming up with the error exceeds machine limits, any help would be appreciated.
Datum Points
Moderators: Martin, Steve, Mr Magoo
- Tony Kelly
- Posts: 19
- Joined: Fri 14 Jun , 2019 17:08 pm
- Hardware/Software: Denford Novamill
Milling VR5
Fusion 360 - Location: Heathrow
Re: Datum Points
Have a look at the Tutorials.
In VRMilling go to Help then Tutorials. Cut part single tool should guide you through.
In VRMilling go to Help then Tutorials. Cut part single tool should guide you through.
- Tony Kelly
- Posts: 19
- Joined: Fri 14 Jun , 2019 17:08 pm
- Hardware/Software: Denford Novamill
Milling VR5
Fusion 360 - Location: Heathrow
Re: Datum Points
Hi Martin
Thanks for that i will give it a go.
Thanks for that i will give it a go.