nope sorry

is there a spec for this machine anywhere?

http://www.ebay.co.uk/itm/Denford-Triac ... SwFdtXzwk7

gagging for the pitch of the lead screw if anyone can help?

whats the pitch of the lead screws on a microrouter?

many thanks for that.

I see inside the machine where the vacuum pump port comes out into the work area. inside the hole is a thread, what thread is that or what is designed to screw into that?

many thanks for the info. I'm trying to iron out a few issues, are there any schematics for this machine? when I press the green vacuum pump button on the front nothing happens, is this control by denford control board? or is that switch linked directly to the vacuum pump? I'm not sure the door swit...

I don't have a license sadly, but thanks for the info.

is that a vacuum pump under the machine? what sort of vacuum table would work with that pump? do denford supply them?

just received the machine are there the correct wiring diagrams around anywhere? http://i187.photobucket.com/albums/x202/magicmushrooms1/cnc/DSC_1955_zpsj8bgma8s.jpg http://i187.photobucket.com/albums/x202/magicmushrooms1/cnc/DSC_1956_zpsw4kkcxk6.jpg http://i187.photobucket.com/albums/x202/magicmush...

I'm looking to purchase this machine and was after some info on it. where might I find the correct spec for it? does anyone know what setup it comes with as standard? doesn't seem to be a manual for it on here, anyone got one? how does tooling/chuck work on a micro router? http://i187.photobucket.co...

the issue was the stepper?

toby1995 wrote:i haven't removed the original motor but it has 4 wires, i bought a replacement just like in the video and it has 8 wires.

I bet if you strip the wire leading to the original stepper there is actually 8 in there

I'm having an issue with my x axis on my triac also. it machines circular parts with steps as if the datum point shifts. no matter what speeds i use it always shifts I've bought a new stepper motor for it that was supposed to be the correct one. but it has 8 wires instead of 4. looks exactly the sa...

The current belt I got off ebay

Is this the correct belt?

http://uk.rs-online.com/web/p/timing-belts/4749434/

got some issues with the x axis, every few months it snaps the belt. please watch these videos closely here my holding the stepper by hand trying to keep it as straight as possible, you can clearly see the stepper jumping. https://www.youtube.com/watch?v=zIy6T6yE9jY so now to try narrow down if its ...

sold

looking at buying a zero centre but got some dimension questions. the brochure says max width 1.6m, where as thr guy selling it is saying its 1.75m wide. it also states height of 2m, but the guy is sayings its 2.5m high, so a big difference. can anyone offer any advice? is the zero centre on feet or...

I'm looking to sell my denford starmill ATC. purchased this machine about 2 years ago on ebay and have never got round to doing anything with it, all my time and money has been spent on my triac. its in excellent condition, I have cleaned the whole machine, all that came out of the machine was plast...

is there a way to tram a triac?

i did do that last night, the machine is pretty much back together now and ive ran the spindle and its sounds pretty good. when i got the bearings i made sure they came with specs so i knew exactly what i was buying, i wanted to future proof them for a possible spindle upgrade. the bearings are rate...

after some faffing I think ive got it right.

id tighten the tab nut so there was no play then gently tap the spindle with a hammer and play would appear. so I kept tightening until I tapped the spindle with a hammer and no play appeared. now the spindle feels smooth and silent