Search found 1428 matches
- Thu 01 Sep , 2022 15:38 pm
- Forum: Cyclone
- Topic: AC2/106 Spacer Drawing
- Replies: 3
- Views: 5624
Re: AC2/106 Spacer Drawing
please find attached drawings. The parts are no longer in stock.
- Wed 10 Aug , 2022 8:34 am
- Forum: F1 / 4x4 / GT Racing In Schools
- Topic: Technical Data Sheet F1 Model Block
- Replies: 2
- Views: 9665
Re: Technical Data Sheet F1 Model Block
All the data we have is shown on the data sheet. Unfortunatley this is all we have.
- Fri 22 Jul , 2022 11:44 am
- Forum: Viceroy
- Topic: Viceroy Sharpedge oil?
- Replies: 2
- Views: 4638
- Tue 19 Jul , 2022 9:40 am
- Forum: Micromill / Microturn
- Topic: (HELP NEEDED) MICROTURN/QUICK TURN 2
- Replies: 1
- Views: 4593
Re: (HELP NEEDED) MICROTURN/QUICK TURN 2
Hi The simulation always shows the cutting from the top so the tool library should not be edited
In Quick Tern 2D Design make sure you have the correct tool Library selected which will also create a program cutting from the front.
In Quick Tern 2D Design make sure you have the correct tool Library selected which will also create a program cutting from the front.
- Tue 31 May , 2022 12:51 pm
- Forum: Cyclone
- Topic: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
- Replies: 10
- Views: 8555
Re: Tu150P, Fanuc OT-C, doesn't bootup - no data on the screen
Thanks for posting the solution.
- Tue 31 May , 2022 12:50 pm
- Forum: Electronics
- Topic: CPLD needs to be updating.
- Replies: 1
- Views: 5001
Re: CPLD needs to be updating.
Hi, Is the machine functioning correctly if so I would leave the firmware as it is. What model of machine do you have and what is the date of manufacture?
- Fri 06 May , 2022 9:04 am
- Forum: VMC 1300
- Topic: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
- Replies: 3
- Views: 5293
Re: VMC 1300, adjustment procedure to eliminate play in toolholder collet/spindle/drawbar assembly
The tool should be pulled up tight in the taper of the spindle so there should be no movement once fitted. Could you remove a pull stud from a toolholder and check it fits in the taper correctly? All that could cause a tool fitted with the correct pull stud to be loose would be that the springs are ...
- Sat 05 Mar , 2022 19:51 pm
- Forum: VersaLaser
- Topic: How to replace mirrors 2 and 3 on versalaser
- Replies: 8
- Views: 19036
Re: How to replace mirrors 2 and 3 on versalaser
You would probably be able to see damage on the mirrors and Len’s if there is any.
A service on the laser may be worth doing. We could measure the laser power before the optics and through them.
The worst case would be you need a laser recharge but it would be worth doing.
A service on the laser may be worth doing. We could measure the laser power before the optics and through them.
The worst case would be you need a laser recharge but it would be worth doing.
- Mon 21 Feb , 2022 14:50 pm
- Forum: Turn270
- Topic: G91 on Turn 270 PRO
- Replies: 1
- Views: 4610
Re: G91 on Turn 270 PRO
Unfortunatly G91 is not supported in VR Turning.
The supported codes are listed in the help.
The supported codes are listed in the help.
- Mon 21 Feb , 2022 14:33 pm
- Forum: Novamill
- Topic: Nova Mill mint version message
- Replies: 9
- Views: 9738
Re: Nova Mill mint version message
Thats great. Thanks for letting us know.
- Tue 15 Feb , 2022 9:53 am
- Forum: Post Processors
- Topic: Fusion 360 Post Processor
- Replies: 0
- Views: 6891
Fusion 360 Post Processor
The attached post processor for Fusion 360 was supplied by Simon Edwards of Ron Dearing UTC.
- Thu 10 Feb , 2022 17:38 pm
- Forum: Denford Classifieds
- Topic: (SOLD) Deublin ltd pneumatic chuck for Mirac PC
- Replies: 12
- Views: 13711
Re: FOR SALE: Deublin ltd pneumatic chuck for Mirac PC
The chuck jaws are soft jaws designed to be machined to hold a specific bar size. You could still buy soft jaws for them.
- Thu 10 Feb , 2022 17:34 pm
- Forum: Novamill
- Topic: Nova Mill mint version message
- Replies: 9
- Views: 9738
Re: Nova Mill mint version message
hi give us a call when you are thinking of coming over. Ask for Martin or Steve.
- Thu 10 Feb , 2022 17:31 pm
- Forum: Project Of The Week
- Topic: Work Area
- Replies: 6
- Views: 8880
Re: Work Area
Hi Trevor, This post would have been better in the microrouter section on the forum https://www.denfordata.com/bb/viewforum.php?f=38 You could download the manual from there. It is possible to lower the motor mounting plate so the tools can get down to the bed. You can see the screws to adjust this ...
- Thu 10 Feb , 2022 17:19 pm
- Forum: VR Turning - All Versions
- Topic: Help with Viceroy Lathe
- Replies: 1
- Views: 5562
Re: Help with Viceroy Lathe
You may be better posting this in the Viceroy page on the forum.
Have you looked on that page?
https://www.denfordata.com/bb/viewforum.php?f=50
Have you looked on that page?
https://www.denfordata.com/bb/viewforum.php?f=50
- Mon 07 Feb , 2022 9:57 am
- Forum: Project Of The Week
- Topic: Work Area
- Replies: 6
- Views: 8880
Re: Work Area
The table and travels are X 400 x Y200 x Z100mm
- Fri 04 Feb , 2022 12:17 pm
- Forum: Micromill / Microturn
- Topic: Micromill z axis jib
- Replies: 1
- Views: 5221
Re: Micromill z axis jib
There are instructions and videos on the sherline website.
https://sherline.com/wp-content/uploads ... b_inst.pdf
https://www.youtube.com/watch?v=4b3VGR5n6DM
https://sherline.com/wp-content/uploads ... b_inst.pdf
https://www.youtube.com/watch?v=4b3VGR5n6DM
- Fri 04 Feb , 2022 12:10 pm
- Forum: Router 2600
- Topic: Random toolpath deviation!
- Replies: 4
- Views: 5858
Re: Random toolpath deviation!
It does look like one of the slides may have stalled. Possibly a Retract in the Z axis. Vacuum down the machine and clean the leadscrews especially the Z axis. Spray the leadscrews with the silicone spray and leave to dry then retry the program but turn the feed override down and see if that improve...
- Fri 04 Feb , 2022 12:01 pm
- Forum: Novamill
- Topic: Nova Mill mint version message
- Replies: 9
- Views: 9738
Re: Nova Mill mint version message
As you are only located in Bradford could you bring the machine and computer to the factory in Brighouse We could take a look at it for you?
- Wed 26 Jan , 2022 12:00 pm
- Forum: Software
- Topic: Secret Home in VR TURNING, MILLING & PCB
- Replies: 0
- Views: 9590
Secret Home in VR TURNING, MILLING & PCB
Secret home details
PCB Engraver
https://www.denfordata.com/bb/viewtopic ... 188#p25188
VR Milling 5 & 2
https://www.denfordata.com/bb/viewtopic ... &t=53#p104
VR Turning
https://www.denfordata.com/bb/viewtopic ... ning#p1649
PCB Engraver
https://www.denfordata.com/bb/viewtopic ... 188#p25188
VR Milling 5 & 2
https://www.denfordata.com/bb/viewtopic ... &t=53#p104
VR Turning
https://www.denfordata.com/bb/viewtopic ... ning#p1649