The VersaLaser printer needs to be set to "print directly to printer" & not as default, Spool print documents so program finishes printing faster.
It can be found in the VL300 or VL200 printer propeties under the Advanced tab.
Search found 1900 matches
- Mon 02 Oct , 2006 17:08 pm
- Forum: VersaLaser
- Topic: Microsoft Outlook error message when trying to print
- Replies: 2
- Views: 4180
- Mon 02 Oct , 2006 17:04 pm
- Forum: VersaLaser
- Topic: Microsoft Outlook error message when trying to print
- Replies: 2
- Views: 4180
Microsoft Outlook error message when trying to print
I have come accross a problem that when attempting to print to the Versalaser the software starts to set up Microsoft Office 2000 instead of opening the VersaLaser print screen.
- Sun 24 Sep , 2006 20:24 pm
- Forum: Triac
- Topic: EMERGENCY!! need dip switch settings for tool changer
- Replies: 22
- Views: 20847
I think that some of these replys relate to other Control types that Denford fitted. The M27 only works on the later machines. The machine Pab has is fitted with a NEE PNC3 control system. I am sure that when we powered one up that we only had to set the Dip switches in order to set it up. The toolc...
- Thu 14 Sep , 2006 19:31 pm
- Forum: Software
- Topic: dongle not found
- Replies: 2
- Views: 4579
- Fri 04 Aug , 2006 17:01 pm
- Forum: Triac
- Topic: i need a draw bar for a triac atc 1990!!.......
- Replies: 6
- Views: 6593
The PNC3 Triac used spindle orientation when performing tool changes, & therefore has a "v" on the top of the bar to assist with alignment. In the UK we now remove all the drive dogs from the spindle nose & ATC arm. Then the inverted "v" attached to the Brower unit can be removed. The circular block...
- Wed 02 Aug , 2006 17:41 pm
- Forum: Triac
- Topic: i need a draw bar for a triac atc 1990!!.......
- Replies: 6
- Views: 6593
Draw Bar
Hi Pab,
What is wrong with your DRAW BAR???
Have you managed to remove it.
You may be able to reuse the original draw bar
Regards
Martin Ironmonger
Service Engineer, Denford Ltd.
What is wrong with your DRAW BAR???
Have you managed to remove it.
You may be able to reuse the original draw bar
Regards
Martin Ironmonger
Service Engineer, Denford Ltd.
- Fri 21 Jul , 2006 20:17 pm
- Forum: VersaLaser
- Topic: Versa Laser System Tray Locked
- Replies: 2
- Views: 5155
- Fri 21 Jul , 2006 20:11 pm
- Forum: Triac
- Topic: Tool does not go into spindle?? help!!!!!!!!!
- Replies: 19
- Views: 16375
Triac Drawbar
Hi Pab, It sounds like you now need to strip the spindle down to investigate further. To do this you need to remove the brower unit from the top of the spindle. You will then see a nut/collar inside the top of the spindle which you need to unsrew. There may be a grub screw locking it in position. Be...
- Mon 17 Jul , 2006 23:33 pm
- Forum: Triac
- Topic: Tool does not go into spindle?? help!!!!!!!!!
- Replies: 19
- Views: 16375
Hiya Pab. It sounds like the stoke of the cylinder is too short. You will need to check the level of oil inside the brower unit. In order to look you need to remove the top silver cap off the unit. There is a area just below where the air pipe plugs in that you can get a spanner on & unscrew it. Ins...
- Mon 17 Jul , 2006 23:25 pm
- Forum: Triac
- Topic: Tool does not go into spindle?? help!!!!!!!!!
- Replies: 19
- Views: 16375
- Mon 17 Jul , 2006 23:20 pm
- Forum: Triac
- Topic: Tool does not go into spindle?? help!!!!!!!!!
- Replies: 19
- Views: 16375
It may be something as simple as the pnuematic pressure to the cylinder or the oil level insider the cylinder. The air pressure needs to be between 80-100psi depending on when the machine was built. I would suggest that you set it at 100psi. The oil level in the cylinder is a bit more tricky, but a ...
- Mon 17 Jul , 2006 23:10 pm
- Forum: Triac
- Topic: Tool does not go into spindle?? help!!!!!!!!!
- Replies: 19
- Views: 16375
- Mon 12 Jun , 2006 23:49 pm
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: Denford ZeroCentre Max rpm
- Replies: 8
- Views: 16015
Zerocentre
The best way to tell the actual speed is to measure directly from the spindle using a tachometer.
It appears that E-Bay has lots of digital tachometers for around £20.
Good luck.
It appears that E-Bay has lots of digital tachometers for around £20.
Good luck.
- Sat 10 Jun , 2006 9:01 am
- Forum: ZeroCentre/ZeroTurn/ZeroBore
- Topic: Denford ZeroCentre Max rpm
- Replies: 8
- Views: 16015
Re: Denford ZeroCentre Max rpm
On the Zerocentre we never used\set the gear ratio on the spindle pulleys. ONLY PARAMETER 540 WAS SET. It may be that you need to set the speeds up as Andy is saying if you want to use the second ratio.
If you change to the other ratio then I guess you need to set Parameter 540 to the new speed.
If you change to the other ratio then I guess you need to set Parameter 540 to the new speed.
Drip feed
Hi, It sounds like you are running DOS software. You need to place the program on a disc or copy it to the hard disc drive if there is one. Next load the program as normal. You will get a message saying that the program is too large. from there if you press reset the program name will change in the ...
- Fri 03 Mar , 2006 16:20 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1AEF in module `VRMilling5.e
- Replies: 4
- Views: 7577
- Fri 03 Mar , 2006 16:19 pm
- Forum: VR Milling - All Versions
- Topic: Access violation at address 005C1AEF in module `VRMilling5.e
- Replies: 4
- Views: 7577
Access violation at address 005C1AEF in module `VRMilling5.e
Error,
Access violation at address 005C1AEF in module `VRMilling5.exe` Read of address 00000000.
Access violation at address 005C1AEF in module `VRMilling5.exe` Read of address 00000000.
- Fri 03 Mar , 2006 12:44 pm
- Forum: VR Turning - All Versions
- Topic: Software updates
- Replies: 1
- Views: 4937
- Fri 03 Mar , 2006 12:41 pm
- Forum: VR Turning - All Versions
- Topic: Software updates
- Replies: 1
- Views: 4937
Software updates
What is the current software version?
- Fri 03 Mar , 2006 12:35 pm
- Forum: VersaLaser
- Topic: Current VersaLaser Software Version
- Replies: 3
- Views: 5734
Current VersaLaser Software Version
What is the current software version?