hi i am in trouble again help please... :( we have a senior 200 fanuc ot lathe which was ok until someone fiddled it and now it fails with a "not ready" 404 servo alarm (vrdy on) now i have looked at the fault code which didnt help me any does anyone have any idea what i should be checking please i ...

:D wowwwwwww well it been a steep learning curve for me but thanks to all your help its working i hadnt tried jogging away from the stop with the button pressed... just had my ppr with the boss he is most impressed he even let me have the bank holiday off.. thanks again for all your patience with an...

I CANT CLEAR THE 511 I HAVE 511 OVERTRAVEL WITH A FLASHING "NOT READY ALARM" WHERE ARE THE OVERTRAVEL PARAMETERS..?? IN.. POS-ALL I HAVE ALL AT 0.00 APART FROM MACHINE X-3.473 Y-0.003 Z-0.000 PRESUMABLY THIS IS AN INDICATION OF THE PROBLEM COULD I MANUALLY MOVE IT ..?? SORRY TO BE A PAIN...

WELL.. THANKS TO YOUR HELP I HAVE SUSSED THE DIAGNOSTIC/PARAMETERS SCREENS..DONT LAUGH... FIDDLING WITH THE 450 SERIES CODES I NOW HAVE CLEARED THE .... 1004 DRIVE TRANSFORMER OVERHEAT 1010 LOW AIR PRESSURE 520 OVER TRAVEL +Y I AM NOW LEFT WITH 511 OVER TRAVEL -X WHICH I CANT CLEAR DESPITE ALL MY EF...

WOW I FIXED ONE....!!!!!!! :D PARAMETER 545 WAS SET AT 147.......... SET IT TO 0 BTW THE MOTOR DIDNT DO A JUMP WHEN POWERED UP PROBLEM IS NOW I HAVE NOW BECOME THE RESIDENT CNC WIZARD WHO KNOWS ALL ABOUT THESE THINGS...:-( THIS IS GOING TO NEED CAREFUL HANDLING....!!!! MANY MANY THANKS FOR YOUR HELP

FROM HELP WITH ERRORS NEEDED PLEASE THREAD THAT WAS CONFUSING.. SENIOR 200 FANUC OT 410 SERVO ALARM X AXIS EXCESS ERROR The Senior sounds a bit like you may have a value in parameters 555 that is causing the motor to jump. Try setting 555 & 556 to 0 Posted: Fri 18 May , 2007 18:24 pm Post subject: -...

I HAVE STARTED ANOTHER THREAD from HELP WITH ERRORS NEEDED PLEASE AS IT WAS GETTING CONFUSED FANUC TRIAC 0-M WAS SUFFERING FROM AN ERROR 102 ? DUE TO SOMEONE POWERING DOWN WHEN IN RECIEVE MODE.. AFTER SOME TIME WE HAVE RE-ENTERED THE CORRUPTED CODES FROM A SHEET WE FOUND WITH .. BUT WE NOW HAVE 3 ER...

HI I HAVE BEEN TASKED TO SORT OUT 3 OF THE COLLEGES DENFORD MACHINES THAT HAVE BECOME UNSERVICEABLE DUE TO VARIOUS REASONS MAINLY UNSKILLED USERS I BELIEVE.. PLEASE BEAR IN MIND I KNOW NEXT TO NOTHING ABOUT THESE MACHINES ONLY WHAT I HAVE GLEANED FROM THE MANUALS I AM AN ELECTRONICS TECH NOT A MACHI...