Hi All
Got the motors now running at full speed by disconnecting the tach wires on pins 1 and 2 of the drive. Any idea what may be causing this?
Really appreciate some feedback.
Cheers
Mick
Search found 7 matches
- Mon 16 Jul , 2018 23:36 pm
- Forum: Electronics
- Topic: Norwin 2110 Drives
- Replies: 1
- Views: 3300
- Sun 15 Jul , 2018 16:29 pm
- Forum: Electronics
- Topic: Norwin 2110 Drives
- Replies: 1
- Views: 3300
Norwin 2110 Drives
NORWIN DRIVE MANUAL 1.pdf Hi All Recently started a conversion on my Denford Senior Lathe. I am using the CSMIO/P-A motion controller by CS Labs. I have the drives powered up and enabled. Can anyone explain in simple terms the easiest way to turn the drives prior to PID tuning in the motion control...
- Sat 24 Dec , 2016 16:36 pm
- Forum: Senior (Tom)
- Topic: Mach3 Conversion
- Replies: 0
- Views: 7913
Mach3 Conversion
Screenshot (46).png Hi all Looking to convert my Denford Senior which has a Fanuc OT control to Mach3 using a CSMIO/IP-A Ethernet Motion Controller (+/- 10V). I was hoping to use the existing Sem motors and Norwin drives. It looks to me like the drives need +/- 15v to control the motors. All the av...
- Sat 19 Dec , 2015 17:14 pm
- Forum: Cyclone
- Topic: Tool offset problems
- Replies: 0
- Views: 6140
Tool offset problems
Hi All Finally got my Senior 200 up and running with a massive help from Martin which is well appreciated. Can anyone please advise on this issue I seem to be having setting the tool offsets. I have followed the manual but when I do a tool change the z axis is out. This is how I have set it using 43...
- Sat 24 Oct , 2015 22:34 pm
- Forum: Triac
- Topic: Denford senior 510 alarm
- Replies: 1
- Views: 2822
Denford senior 510 alarm
Hi All
Finally got round to powering up a Denford Senior 200 that I have had sitting around now for 12 months. All powers up ok but I have a (NOT READY and an alarm 510 over travel).
Would really appreciate any help. The machine is 1990 with a fanuc ot control.
Cheers all
Mick
Finally got round to powering up a Denford Senior 200 that I have had sitting around now for 12 months. All powers up ok but I have a (NOT READY and an alarm 510 over travel).
Would really appreciate any help. The machine is 1990 with a fanuc ot control.
Cheers all
Mick
- Mon 14 Jul , 2014 22:29 pm
- Forum: Senior (Tom)
- Topic: Denford senior 200 parameters
- Replies: 3
- Views: 10022
Re: Denford senior 200 parameters
Hi There
Thanks for your reply. Its a Denford senior 200 1990 with 8 station turret. I am not picking the machine up until Saturday so will be able to provide a serial number then if needed. Are the parameters different between serial numbers? I thought that model would all be the same??
Thanks
Mick
Thanks for your reply. Its a Denford senior 200 1990 with 8 station turret. I am not picking the machine up until Saturday so will be able to provide a serial number then if needed. Are the parameters different between serial numbers? I thought that model would all be the same??
Thanks
Mick
- Sat 12 Jul , 2014 13:48 pm
- Forum: Senior (Tom)
- Topic: Denford senior 200 parameters
- Replies: 3
- Views: 10022
Denford senior 200 parameters
Hi Everyone
I have just purchased a Denford senior 200 with fanuc ot control built 1990. Would anyone happen to have the original parameters for this machine. I have been told that because the machine has not been used that the battery may have gone flat and lost its setting?
Many Thanks
Michael
I have just purchased a Denford senior 200 with fanuc ot control built 1990. Would anyone happen to have the original parameters for this machine. I have been told that because the machine has not been used that the battery may have gone flat and lost its setting?
Many Thanks
Michael