QuickTURN2D v1.36 released 29th April 2024
v1.36 - The maximum width of the billet has been increased to 200mm from 100mm.
Find the latest version here:
https://www.denfordata.com/downloads/Qu ... _v1.36.zip
Search found 3646 matches
- Mon 29 Apr , 2024 14:00 pm
- Forum: QuickTURN 2D Design
- Topic: QuickTURN2D v1.36 released 29th April 2024
- Replies: 0
- Views: 521
- Fri 12 Apr , 2024 11:55 am
- Forum: QuickCAM / LaserCAM 2D Design
- Topic: QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024
- Replies: 0
- Views: 984
QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024
QuickCAM 2D v2.11 and LaserCAM 2D v2.9 released 12th April 2024 LaserCAM and QuickCAM are resistant if an image file is uploaded which does not contain any image data. Previously it would crash. Now it just shows the image as blank. The minimum speed of the post processor simulation has been drastic...
- Tue 09 Apr , 2024 11:00 am
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.17 released 9th April 2024
- Replies: 0
- Views: 749
VR Milling v6.17 released 9th April 2024
VR Milling v6.17 released 9th April 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 9th April 2024 Acceleration on the axes has been reduced to help stalling at the highest speeds The Trio connection software works better with lang...
- Tue 12 Mar , 2024 11:28 am
- Forum: QuickCAM / LaserCAM 2D Design
- Topic: QuickCAM 2D v2.10 released 12th March 2024
- Replies: 0
- Views: 1085
QuickCAM 2D v2.10 released 12th March 2024
QuickCAM 2D v2.10 released 12th March 2024
There is an improvement to the DXF import, which can now deal with a wider range of DXF file formats.
As usual - check here for the latest version:
https://denfordata.com/downloads/QuickC ... nv2.10.zip
There is an improvement to the DXF import, which can now deal with a wider range of DXF file formats.
As usual - check here for the latest version:
https://denfordata.com/downloads/QuickC ... nv2.10.zip
- Wed 21 Feb , 2024 15:24 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.16 released 21st February 2024
- Replies: 0
- Views: 1549
VR Milling v6.16 released 21st February 2024
VR Milling v6.16 released 21st February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 21st February 2024 Improvement to the import of DXF files. All DXFs that have been tested have all been imported, regardless of the DXF version...
- Mon 05 Feb , 2024 13:20 pm
- Forum: VR Turning - All Versions
- Topic: VR Turning 6.16 released 5th February 2024
- Replies: 0
- Views: 1655
VR Turning 6.16 released 5th February 2024
VR Turning 6.16 released 5th February 2024 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //5th February 2024 The acceleration on the X and Y axes on the Turn 270 and Turn 370 has been decreased slightly. It was occasionally possible to s...
- Tue 17 Oct , 2023 15:00 pm
- Forum: VR Turning - All Versions
- Topic: VR Turning 6.15 released 17th October 2023
- Replies: 0
- Views: 25436
VR Turning 6.15 released 17th October 2023
VR Turning 6.15 released 17th October 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //17th October 2023 On machines with the manual toolchange button, it was possible to start jogging while the carousel was in motion, or to start th...
- Fri 22 Sep , 2023 12:30 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.15 released 22nd September 2023
- Replies: 0
- Views: 32870
VR Milling v6.15 released 22nd September 2023
VR Milling v6.15 released 22nd September 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ // 22nd September 2023 Major fix to the importing of DXFs when selecting the path cutting and outlines. Previously the selected cutter path was n...
- Thu 13 Jul , 2023 14:23 pm
- Forum: Software
- Topic: Problems with OCX file not automatically registering
- Replies: 8
- Views: 33335
Re: Problems with OCX file not automatically registering
Hi Max. If you look in the 'Machine Easy Upgrader' directory on the CD, right click on the file Setup.exe, and choose 'Run as administrator'. Hopefully that will install correctly.
- Fri 07 Jul , 2023 12:18 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.14 released 7th July 2023
- Replies: 0
- Views: 25066
VR Milling v6.14 released 7th July 2023
VR Milling v6.14 released 7th July 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //7th July 2023 The restore backsup offsets now reads from the correct directory. Previously it would not show any files if they were not in the defaul...
- Wed 05 Jul , 2023 12:17 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.13 released 5th July 2023
- Replies: 0
- Views: 23940
VR Milling v6.13 released 5th July 2023
VR Milling v6.13 released 5th July 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //5th July 2023 If a design is created in QuickCAM Pro or QuickCAM 2D and then automatically sent to VR Milling, the design will only be accepted if VR...
- Thu 29 Jun , 2023 12:08 pm
- Forum: QuickCAM / LaserCAM 2D Design
- Topic: QuickCAM 2D v2.9 released 29th June 2023
- Replies: 0
- Views: 32402
QuickCAM 2D v2.9 released 29th June 2023
QuickCAM 2D v2.9 released 29th June 2023 If the current machine was changed in VR Milling, and Quickcam 2D was open, QC2D wouldn't pick up on the change of machine and would keep writing to the old material library. It will now read and write to the correct material library without having to be rest...
- Mon 19 Jun , 2023 14:47 pm
- Forum: VR Turning - All Versions
- Topic: Tool offset values corrupted when in "Inch" mode.
- Replies: 1
- Views: 9544
Re: Tool offset values corrupted when in "Inch" mode.
Hi Max. There is a new version of VR Turning, V1.55, which fixes the tool offset issue. The conversion from metric to imperial was being applied at the wrong time, and so the value was being multiplied every time the window was opened. It is now only applied once. https://www.denfordata.com/download...
- Mon 19 Jun , 2023 13:19 pm
- Forum: VR Turning - All Versions
- Topic: VR Turning v1.55 released 19th June 2023
- Replies: 0
- Views: 24935
VR Turning v1.55 released 19th June 2023
VR Turning v1.55 released 19th June 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //19th June 2023 There was a bug on the tool offsets page where the metric>imperial calculation would be applied every time the tool window was opened...
- Mon 19 Jun , 2023 12:52 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.12 released 19th June 2023
- Replies: 0
- Views: 24587
VR Milling v6.12 released 19th June 2023
VR Milling v6.12 released 27th June 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //27th June 2023 Update for the VNC to allow six station tool changers as well as eight station. The number of stations is definined in the machine pa...
- Thu 20 Apr , 2023 12:01 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.11 released 20th April 2023
- Replies: 0
- Views: 25098
VR Milling v6.11 released 20th April 2023
VR Milling v6.11 released 20th April 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //20th April 2023 Offset backup and restore writes to the VR Milling 6 directory now, not the generic Denford one. Show all on the restore page shows...
- Fri 03 Mar , 2023 13:31 pm
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.9 released 3rd March 2023
- Replies: 0
- Views: 24950
VR Milling v6.9 released 3rd March 2023
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
//3rd March 2023
Tool change will always return to the correct position in both programmed and manual mode.
https://denford.co.uk/software-downloads-support/
//3rd March 2023
Tool change will always return to the correct position in both programmed and manual mode.
- Mon 27 Feb , 2023 15:35 pm
- Forum: VR Turning - All Versions
- Topic: VR Turning v1.54 released 27th February 2023
- Replies: 0
- Views: 25139
VR Turning v1.54 released 27th February 2023
VR Turning v1.54 released 27th February 2023
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
The wizard screens are now presented again corrected in Windows 10 and 11.
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
The wizard screens are now presented again corrected in Windows 10 and 11.
- Fri 17 Feb , 2023 11:30 am
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.8 released 17th February 2023
- Replies: 0
- Views: 25023
VR Milling v6.8 released 17th February 2023
VR Milling v6.8 released 17th February 2023
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
//17th February 2023
Addition of configuration for the Compact 1000.
More consistent speeds when making linear moves.
Check here to download the latest version of all software:
https://denford.co.uk/software-downloads-support/
//17th February 2023
Addition of configuration for the Compact 1000.
More consistent speeds when making linear moves.
- Thu 19 Jan , 2023 11:46 am
- Forum: VR Milling - All Versions
- Topic: VR Milling v6.7 released 19th January 2023
- Replies: 0
- Views: 24877
VR Milling v6.7 released 19th January 2023
VR Milling v6.7 released 19th January 2023 Check here to download the latest version of all software: https://denford.co.uk/software-downloads-support/ //19th January 2023. Improvement to how the Micromill handles the EStop button. The EStop always worked and now VR Milling will report it quicker. P...