Search found 6 matches

by donm0098
Sun 18 Mar , 2018 4:00 am
Forum: Triac
Topic: Spindle motor low tacho voltage
Replies: 2
Views: 3259

Re: Spindle motor low tacho voltage

Thanks Martin.
by donm0098
Wed 14 Mar , 2018 15:16 pm
Forum: Triac
Topic: Spindle motor low tacho voltage
Replies: 2
Views: 3259

Spindle motor low tacho voltage

I have a 1998 Triac PC. It has problems with RCD trip out at high revs. The spindle motor is an SMC MT30V4-36. It is rated at 140 volts, 4000 rpm and tacho output of 9.5 volts per 1000 revs. The insulation of the armature measured at about 4 meg, so I had a refurbishment of the brushes and commutato...
by donm0098
Sun 17 Sep , 2017 1:58 am
Forum: Triac
Topic: vr milling v2 with nextmove controller
Replies: 2
Views: 3471

Re: vr milling v2 with nextmove controller

Thanks for your help Martin. Changing the machine to TriacNS fixed the communication problem.
by donm0098
Tue 12 Sep , 2017 17:38 pm
Forum: Triac
Topic: vr milling v2 with nextmove controller
Replies: 2
Views: 3471

vr milling v2 with nextmove controller

I have a triac PC that has been upgraded to work with USB. Does VR milling version 2 work with the triac USB upgrade? I can communicate with the controller card via the USB and the serial port OK using mint workbench and denford easy upgrade software. They identify the card as a nextmove st. But VR ...
by donm0098
Sun 11 Jun , 2017 2:10 am
Forum: Novamill
Topic: Novamill fail on G02
Replies: 1
Views: 3776

Novamill fail on G02

I am running a Novamil with VR milling version 2. The machine has been working fine up to now, but it has failed to execute the G02 instruction correctly. This is the line that caused the problem. G02X5.431Y-5.48I.035J.035 It should cut a semicircle at 45 degrees. But when this line executes, the ma...
by donm0098
Fri 10 Jan , 2014 14:02 pm
Forum: Novamill
Topic: novamill tool holder
Replies: 1
Views: 3648

novamill tool holder

I am looking for another tool holder for my Novamill.
Am I correct in thinking that the taper required is ISO30?